Winds: (Saturday) 2-5 Variable
Seas: (Saturday) 2-3 inside the reef, 2-3 outside the reef
Surf Temp: +/- 84 F
Viz: 25-30 feet
Unfortunately, due to some mechanical difficulties, we were only able to dive Saturday morning, but the morning was very nice. High tide was at about 10:30am, and we were about an hour early. We fought the incoming tide for about 30 minutes before it started to slacken up. After that we got a good 45 minutes of slack tide, where we were really able to make up some ground. We moved along quickly, as we have noticed that the fish seem to get a little scarce once the tide actually switches. We're seeing a lot more grouper this year, which is very encouraging. It really makes the increase to 24" in the size limit (about 2-3 years ago) worthwhile. We shot 3 gags and a black, and saw a whole bunch more that just didn't feel like cooperating :)..
Spearviews
Spearviews
Omer Zero Cubed Freediving Mask
- Saturday, 28 September 2013 18:22The summer had been busier than I would have liked this year and I honestly hadn't had as many opportunities to post much less given much thought to writing a new SpearView, but after having time to really reconsider, I realized that I had actually had multiple opportunities to try out new equipment this year (not all of it successfully). Further to that point, when I took the PFI Freediver course back in March I had decided to invest in a new mask and ended up deciding on the Omer Zero Cubed...
4th Annual Blue Wild - June 5-6, 2010
- Monday, 07 June 2010 08:53This past weekend, I finally got to go to The Blue Wild dive expo. After 3 years of everybody telling me about it and not being around to get to go to it, the stars finally aligned and I was able to check it out. Unfortunately, it meant missing out on 5-10mph winds and less than 1' seas inside the reef, but there were other reasons I couldn't get out this weekend, so I figured I would take advantage to check it out and possibly win something from the raffle to boot (I won't keep you in...
March 2009 - Euro 120 Reel
- Saturday, 30 January 2010 08:23It didn't take me long to finish rigging up the 120 with a new reel and 2.2mm dyneema line. Unfortunately as of now (Apr 2009), I haven't had an opportunity to get into the blue water to put this new toy through its paces. I am definitely jones'ing to give it a try! I am also working on making my own flashers for use in blue water. I have been watching these being used on a few spearfishing shows and their reasoning seems sound for their success. They didn't seem too hard to make, so I decided...
In the beginning...
- Saturday, 30 January 2010 08:16Throughout my relatively short history in spearfishing (as of this writing), I have only used a few different spearguns. Now obviously, my opinion in this matter is not one of extreme trial and error. Mostly it consists of recommendations made to me by those I spearfish with along with some of my own common sense. In the beginning (early 1990's), I used one of my brother-in-law's extra guns. Specifically, a 38" Arbalette. Now this gun had already seen finer days by the time I started using it....
Riffe N.F. Horizontal Reel
- Wednesday, 21 December 2011 15:51I realized recently that I had overlooked the fact that I had purchased and used some new SpearGear at the beginning of the Summer of 2011 and hadn't gotten around to posting about it (here or in SpearGear). This article is going to be one that definitely crosses over between SpearViews and SpearGear because of the fact that I do own it but I definitely think it's worthy of a review as well. In the end, SpearViews won the coin toss deciding where I would put the article (especially after I...
Feb 2010 - Camera Mount
- Thursday, 11 February 2010 20:57Believe it or not my latest addition to my spearguns is not one for shooting fish (well at least not shooting to kill them). But it hopefully will help others watch online what I love to do underwater. I have made a camera mount for my Riffe Euro guns. This mount will fit on any Euro that has the reel inserts (basically all of them). It was terribly simple to make. The only fairly tricky part was putting together the actual mount screw for the camera tripod mount itself.